Technical Characteristics; Installation Instructions - Climadiff DUOVINO/1 Gebrauchsanweisung

3. TECHNICAL CHARACTERISTICS

Below is an example of the nameplate:
The name plate attached to the inside or rear of the appliance (depending on the model) includes all
the information specific to your appliance.
We recommend that you make a note of its serial number in this booklet prior to installation, so that
you can refer to it later (technical work, request for assistance, etc.)
Once it is installed and loaded, access to it is not so easy.
CAUTION: No assistance can be provided without this information.

4. INSTALLATION INSTRUCTIONS

Before using your appliance
 Remove the inner and outer packaging.
 Allow the appliance to rest for two hours before switching it on.
 Clean the inside using a soft cloth and lukewarm water.
Using your temperature control cellar
The appliance must be positioned in a room with an ideal ambient temperature of 25°C.
If the ambient temperature is higher or lower, the appliance's performance may be affected.
Installing your appliance
 This appliance is only designed for free-standing installation, and must not be built-under or built-
in.
 Position it in a place with sufficient strength to support its weight when loaded. To ensure that it is
level, adjust the height of the feet underneath.
 To get the best from your appliance with the lowest energy consumption, do not place the
27