DESCRIPTION OF THE DEVICE
Overview ~ rear
(1) Programming buttons with
LED display
(2) DMX-In plug
(3) Fuseholder
(4) Power supply
(5) Microphone
(6) Rotary dial
(7) DMX-Out socket
(8) Attachment eyelet
Features
LED pinspot with QCL LED and DMX control
• Operable in stand-alone mode or DMX interface
• DMX512 control possible via any commercial DMX controller (occupies max.8 channels)
• 6 or 8 DMX channels selectable for numerous applications
• Sound-controlled via built-in microphone
• Microphone-sensitivity adjustable via rotary-control
• For illuminating mirror balls, as decoration for display windows and as party room decoration
• Functions: static colors, RGBW color change, internal programs, dimmer, strobe effect, Master/Slave
function
• Programmable color change speed and strobe effect
• Locking possibility at the mounting bracket
• Comfortable addressing and setting via Control Board with LED display and four operating buttons
• Equipped with a 15 W QCL (quadcolor LED) in the colors red, green, blue and white
• Ready for connection via IEC power cord with safety-plug
INSTALLATION
Overhead rigging
Please consider the EN 60598-2-17and the respective national standards during the installation!
The installation must only be carried out by an authorized dealer!
The installation of the device has to be built and constructed in a way that it can hold 10 times the weight for
1 hour without any harming deformation.
DANGER TO LIFE!
17/23
00065717.DOC, Version 1.1