Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Should the fountain, the cable or the power adapter show signs of mechanical damage, discontinue using
the device.
Make sure that there are no objects susceptible to water within a diameter of 30 cm to the fountain, as water
may sporadically be splashed around.
The fountain is for indoor use only.
Please ensure that the pump/mist maker is fully submerged in the water at all times. Check the water level
regularly. The pump/mist maker shall not run dry. Always unplug the power adapter from the socket before
refilling water.
The conveyance temperature of the water must lie between 5° and 35° Celsius.
Use is permitted with pure, clear and distilled water only. Distilled water is recommended.
DESCRIPTION OF THE DEVICE
Features
Fountain BR7
This fountain radiates harmony and calmness through its plastical representation of the motive "mother with
child". By its smooth gurgling, a unique atmosphere for relaxation of the senses is created.
Fountain BR8
Sun worship by men is supposedly as ancient as humanity itself. There are sun gods in many culture areas.
Countless are the legends, too, which surround those gods, mostly seen as personification of the sun, the
light and the warmth. Our sun goddess - and this is not a legend, has clear strengths:
Fountain BR9
Absorb new energy! According to Feng Shui, moving water also stands for a renewal of energy. By its
smooth gurgling, this decorative fountain also provides for a calm atmosphere.
Fountain BR10
With this indoor fountain you create mystical moments. A sprayer create a fine mist, which in turn provides
for a mysterious atmosphere. This atmosphere is even amplified by illumination with respectively four red,
yellow and blue LEDs.
• Timeless beautyful design
• Enhances air humidity in rooms and thus the well-being
• Ultimate eye-catcher
• GRP (fiber glass reinforced plastic) made of high-quality polyester resin
• Pump (with 6 white LEDs) and appropriate power unit included in delivery (only valid for BR7-BR9)
• Pump (with 4 red, 4 yellow and 4 blue LEDs) and appropriate power unit included in delivery (only valid for
BR10)
• Color changing LEDs as component part of the sprayer (only valid for BR10)
• Power supply 230 V via enclosed power unit
• Exclusively for indoor use
Installation
Install the fountain at the desired location and fill the device with water (distilled water is recommended).
With conventional tap water, sediment can gather on the pump after some time which will destroy it.
This fountain is constructed for a standing installation only. The device must only be installed absolutely
planar at a vibration-free, oscillation-free location.
Connect the power cable of the fountain to the transformer. Connect the transformer to the mains.
9/10
00037454.DOC, Version 1.1
Werbung
Inhaltsverzeichnis
