Herunterladen Diese Seite drucken

Hama BTH Run Bedienungsanleitung Seite 6

Vorschau ausblenden Andere Handbücher für BTH Run:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

5.4. Audio playback
Note
• Note that the functions described under 5.3. and 5.4. are
only possible with an active Bluetooth connection.
• Your terminal device must also support the individual
functions.
• For more information, please refer to the operating
instructions of your terminal device.
• Functions can still be controlled directly via the terminal device.
• Set the volume on your terminal device to a low level.
• Switch the headset on using the MF button (5). Upon successful
connection, a voice says, "Connected".
• Start audio playback on the connected terminal device.
• Press Volume + (4) to increase the volume. There is an
announcement when the maximum volume is reached.
• Press Volume - (6) to reduce the volume.
• Press the MF button (5) to start or pause audio playback.
• Press and hold Jump forward one title (4) to skip to the
next title.
• Press and hold Jump backward one title (6) to skip to the
previous title.
5.5. Hands-free function
• Press the MF button (5) once to answer an incoming call.
• Press and hold the MF button (5) for approx. 2 seconds to reject
an incoming call.
• During a call, you can put it on hold by pressing and holding the
MF button (5) for approx. 2 seconds.
• Press and hold the MF button (5) again for approx. 2 seconds
to continue the call.
• During a call, press the MF button (5) once to end the call.
• Press and hold the MF button (5) for approx. 2 seconds to call
the number of the last call.
Note – Call quality
To increase the call quality, make sure that you are near the
headset with your mobile phone during the call.
5.6. Disconnecting the headset
• Switch the headset off.
• Disconnect the headset via the Bluetooth settings on your
terminal device.
5.7. Battery capacity
• An announcement is made and the display flashes in red when
the battery is low
• Charge the headset as described in 4. Getting Started.
4
All manuals and user guides at all-guides.com
6. Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth and do
not use aggressive cleaning agents. Make sure that water does not
get into the product.
7. Warranty Disclaimer
Hama GmbH & Co. KG assumes no liability and provides no
warranty for damage resulting from improper installation/mounting,
improper use of the product or from failure to observe the operating
instructions and/or safety notes.
8. Service and Support
Please contact Hama Product Consulting if you have any questions
about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com

Werbung

loading

Diese Anleitung auch für:

Bth active001770940017709500177096