Removing The Transformer With Twinfix - JANE TRANSFORMER iTECH Bedienungsanleitung

ATTENTION!
• TWINFIX is an additional attachment system to stabilize the TRANSFORMER
and does not replace the security using the safety belt.
• Children and the seat without a child must always be secured using the
vehicles own 3-point safety belt.

_ REMOVING THE TRANSFORMER WITH TWINFIX

To remove the TRANSFORMER press the TWINFIX button (09) to release the strap
and move the seat fully forwards. Next, slide the locking buttons on the outer sides of
the TWINFIX adapters (10) forwards until the safety indicators are red.
Now pull the seat forwards and away from the ISOFIX points.
Lay the seat with the backrest on a flat surface. Pull the TWINFIX strap (08) until the
TWINFIX adapters (10) are fully retracted. 3.b
3.a
EN
29