Quick User Guide; Controls And Programs - Teka LI5 1080 Bedienungsanleitung

6. QUICK USER GUIDE

This washing machine automatically adjusts
the level of the water to the type and
quantity of washing. This system gives a
reduction in energy consumption and a
saving in washing times.
Program selection
l
Turn on the washing machine and select
the required program.
l
Adjust the washing
necessary and press the required "option"
buttons.
l
Press the START/PAUSE button to start
washing.
If there is a break in the power supply
whilst the machine is operating, when
the power is restored, the machine will
restart from the beginning of the phase it
was in when the power was lost.
l
At the end of the programme, the
message "End" will appear on the display
or, on some models, all wash stage
indicator lights will turn on.
Wait until the DOOR LOCKED light has
gone out before opening the door.
l
Turn off the washing machine.
For any type of wash, see the program
table and follow the operating sequence
as indicated.
Technical data
Water pressure:
min 0.05 Mpa / max 0.8 Mpa
(0.05 MPa dispenses approximately 1 litre
of water in 10 seconds)
Spin r.p.m.: See rating plate.
Power input / Power current fuse amp /
Supply voltage: See rating plate.
7. CONTROLS AND
temperature if
A Programme selector with OFF
B START/PAUSE button
C DELAY START button
D OPTIONS button
E QUICK / STAIN LEVEL button
F TEMPERATURE SELECTION
G SPIN SPEED button
F+G KEY LOCK
H Digital display
I OPTIONS indicator lights
L DOOR LOCKED indicator light
M KG LOAD indicator light
N KEY LOCK indicator light
O TEMPERATURE SELECTION
P SPIN SPEED indicator lights
39
PROGRAMS
I L
H
D
C E
position
button
indicator lights
A
MNO P
F G B