Velleman VTSS230 Bedienungsanleitung Seite 4

VTSS230
Always disconnect mains power when the device
is not in use or when servicing or maintenance
activities are performed. Handle the power cord
by the plug only.
Caution! After switching off, leave the power
cord plugged in for a few minutes. When you
switch off the unit, the automatic cooling function
blows cooling air through the heater pipe for a
short period. This protects the heater from
damage and extends its lifetime. Do not
disconnect the mains plug during this cooling
process.
Do not crimp the power cord and protect it
against damage.
Warning! If the power cord is damaged, it must
be replaced by the manufacturer, its service
agent, or similarly qualified persons in order to
avoid any hazard.
Make sure that the available voltage does not
exceed the voltage stated in the specifications of
this manual.
Plug the power cord into a suitable, earthed
mains outlet.
Risk of electroshock when opening the cover.
Touching live wires can cause life-threatening
electroshocks. Do not disassemble or open the
housing yourself. Have the device repaired by
qualified personnel.
Do not operate the device with wet hands.
Never use the device on live electronic circuits.
Make sure power to the work piece is cut and
capacitors are discharged.
V. 05 – 16/03/2022 4 ©Velleman Group nv