Time Setting; Alarm Setting - Levenhuk Wezzer PLUS LP60 Bedienungsanleitung

NOTE! Although the sensor is weather resistant, never place it in direct sunlight or in the rain
or snow.

Time setting

Press the MODE button and hold it for 3 seconds. The digits that are to be set are flashing. Press
UP or DOWN to change the value, and then press MODE to continue.
The setting order: Hours > Minutes > Year > Month > Date > 12/24h.
Finally, press the MODE button to save the settings and exit.
The language and the selected abbreviations for each day of the week are shown in the
following table.
Language Monday
English, EN MO

Alarm setting

Press the MODE button, and then press it again and hold it for 3 seconds. The digits that are to
be set are flashing. Press UP or DOWN to change the value, and then press the MODE button to
continue.
The setting order: Hours > Minutes.
Press UP or DOWN to turn the alarm on or off.
Snooze/light function
• When the alarm rings, press SNZ/LIGHT to activate the snooze function. The alarm will
sound again in 5 minutes.
• Press any button to silence the alarm until the set alarm time is reached again.
NOTE! In battery mode, display dimming is disabled.
Weather
Temperature
Press the UP button to switch between °C and °F.
Weather forecast
1. Sunny
2. Partly cloudy
3. Cloudy
4. Rainy
5. Snowy
The temperature and humidity trend indicator shows the trends for the next 12 hours.
• The value is rising:
Tuesday Wednesday
TU WE
1 2
• The value is falling:
Thursday Friday
TH FR
3
7
Saturday Sunday
SA SU
4 5