Time Setting; Alarm Setting - Levenhuk Wezzer PLUS LP40 Bedienungsanleitung

• The effective range may differ depending on the unit's position. Due to interference (various remote control devices,
etc.), the maximum distance between the base unit and the sensor may be significantly reduced. In such cases, we
suggest moving the base unit and sensor a little. Sometimes it is enough to move one of these units a few inches!
NOTE! Although the sensor is weather resistant, never place it in direct sunlight or in the rain or snow.

Time setting

Press the SET button and hold it for 3 seconds. The digits that are to be set are flashing. Press UP or DOWN to change the
value, and then press SET to continue.
The setting order: Hours > Minutes > Year > Month > Date > 12/24h.
Finally, press the SET button to save the settings and exit.
The language and the selected abbreviations for each day of the week are shown in the following table.
Language Monday
English, EN MO

Alarm setting

Press the SET button, and then press it again and hold it for 3 seconds. The digits that are to be set are flashing. Press UP or
DOWN to change the value, and then press the SET button to continue.
The setting order: Hours > Minutes.
Press UP or DOWN to turn the alarm on or off.
Snooze/light function
• When the alarm rings, press SNZ/LIGHT to activate the snooze function. The alarm will sound again in 5 minutes.
• Press any button to silence the alarm until the set alarm time is reached again.
NOTE! In battery mode, display dimming is disabled.
Weather
Temperature
Press the UP button to switch between °C and °F.
Tuesday Wednesday
TU WE
Thursday Friday
TH FR
6
Saturday Sunday
SA SU