Personal Safety; Safety Instructions For Assembly; Safety Instructions For Operation - Husqvarna DE 110S Bedienungsanweisung

intervals, especially if used frequently for working on
conductive materials.
• If operating an appliance in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of a RCD reduces the risk of
electric shock.
• Do periodic electrical safety tests on the product.
Refer to local regulations for the correct procedure.

Personal safety

• Stay alert, watch what you are doing and use
common sense when operating the product. Do not
use the product while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating the product may result
in serious personal injury.
• Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will reduce
personal injuries.
• Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source,
picking up or carrying the tool. Carrying the product
with your finger on the switch or energising product
that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning
the product on. A wrench or a key left attached to
a rotating part of the product may result in personal
injury.
• Do not overreach. Keep proper footing and balance
at all times. This enables better control of the
product in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away from
moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
• If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
• Do not let familiarity gained from frequent use of
tools allow you to become complacent and ignore
tool safety principles. A careless action can cause
severe injury within a fraction of a second.
Product use and care
• Do not force the product. Use the correct product
for your application. The correct product will do the
job better and safer at the rate for which it was
designed.
• Do not use the product if the switch does not turn
it on and off. Any product that cannot be controlled
with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source, if
detachable, from the product before making any
adjustments, changing accessories, or storing the
product. Such preventive safety measures reduce
the risk of starting the product accidentally.
1587 - 007 - 24.01.2022
• Store idle the product out of the reach of children
and do not allow persons unfamiliar with the product
or these instructions to operate the product. The
product is dangerous in the hands of untrained
users.
• Maintain the product and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the
product´s operation. If damaged, have the product
repaired before use. Many accidents are caused by
poorly maintained product.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
• Use the product, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the product for operations
different from those intended could result in a
hazardous situation.
• Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
Service
• Only let an approved service center do servicing and
only with approved spare parts. This will keep the
product safe.
Maintenance schedule on page 16 for
• Refer to
more information.

Safety instructions for assembly

WARNING:
instructions that follow before you assemble
the product.
• Unauthorized modifications and/or accessories may
lead to serious injury or death to the user or others.
• Use only attachments as described in this manual.
Use only manufacturers recommended attachments.
• Make sure that the assembly area is firm, so the
product does not tip over. Risk of personal and
material injury.
• Be careful, the toggle fasteners can cause damage
to the operator when assembling the product.

Safety instructions for operation

WARNING:
instructions that follow before you use the
product.
• Do not operate the product if the power cord or the
plug is damaged.
• If the product does not operate correctly, hits the
ground, is damaged, left outdoors or falls into water,
Read the warning
Read the warning
11