VOLTCRAFT 2399954 Bedienungsanleitung Seite 103

Do not immerse into water!
Avoid operation near strong magnetic fields.
Do not cover the sensor openings.
• Ensure that rubber seals are in the correct positions and that
the cap is tightly put on the data logger.
• Place the data logger at the intended location.
• The protective cap must be removed for inserting/changing
battery or reading the saved data via a computer. Pull the pro-
tective cap off the device.
• Attach the protective cap tightly to data logger before next
recording.
Enter function menu
1
Press button DOWN (6) to enter the function menu. The latest
recorded measurement, logger ID and selected start/stop mode
during configuration appear in sequence by consecutive presses
of the button DOWN.
Start recording
2
• Recording starts based on configuration setting "RECORD
START CONDITION".
• When the data logger starts recording, "
LC display.
• "P" indicates data logger is ready for recording and it disap-
pears once the data logger records.
" appears on the
103