Care And Maintenance; Accessories; Customer Service; Disposal - Rothenberger Rodiadrill Ceramic Bedienungsanleitung

 Only use diamond drill bits that have been tested by ROTHENBERGER.
To some extent, commercially available diamond bore crowns from third-party manufacturers
feature excessive true-running inaccuracy. Problems arise for this reason when starting up on
damageable surfaces and in addition to these precision boreholes are not possible.
5

Care and Maintenance

Clean carefully after drilling has been finished and blow out using compressed air. Lightly lubri-
cate screws and thread.
Flushing head: drain off water, blow out and oil the thread lightly.
Remove all water and grease from the hand grip.
Important! All maintenance, overhauling and repair work must only be carried out by trained
specialised staff.
6

Accessories

You can find suitable accessories in the main catalog or at www.rothenberger.com
7

Customer service

The ROTHENBERGER service locations are available to help you (see listing in catalog or on-
line) and replacement parts and service are also available through these same service locations.
Order your accessories and spare parts from your specialist retailer or using RO SERVICE+
online: ℡ + 49 (0) 61 95/ 800 8200
www.rothenberger.com
8

Disposal

Components of the unit are recyclable material and should be put to recycling. For this purpose
registered and certified recycling companies are available. For an environmental friendly dispos-
al of the non-recyclable parts (e.g. electronic waste) please contact your local waste disposal
authority.
For EU countries only:
Do not dispose electric tools with domestic waste. In accordance with the European
Directive 2012/19/EU the disposal of electrical and electronic equipment and its imple-
mentation as national law, electric tools that are no longer serviceable must be collected
separately and utilised for environmentally compatible recycling.
+ 49 (0) 61 95/ 800 7491  service@rothenberger.com -
ENGLISH 15