Replacing The Interior Lamp - Beko CBI 7702 Bedienungsanleitung

Replacing the interior lamp

Should the light fail to work, proceed
as follows.
1.
Switch off at the socket outlet
and pull out the mains plug.You may
find it useful to remove shelves for
easy access.
2.
Use a flat tipped screwdriver to
remove the light diffuser cover.
3.
First check that the lamp
hasn't worked loose by ensuring it
is screwed securely in the holder.
Replace the plug and switch on.
4. If the lamp works, replace the
light cover by inserting the rear lug
and pushing up to locate the front
two lugs.
5. If the light still fails to work, switch
off at the socket outlet and pull out
the mains plug. Replace the lamp
with a new 15 watt (max) screw cap
(SES) lamp.
6. Carefully dispose of the burnt-out
lamp immediately.
7. Replacement light lamp can
easily be obtained from a good local
electrical or DIY store.
All manuals and user guides at all-guides.com
10
EN