Inhaltsverzeichnis
Werbung
DESCRIPTION OF PRODUCT
1
A. Rapid 105 Table stapler.
B. Rapid 106 Saddle stapler enabling flat
stapling.
Several units can be connected for
simultaneous use. The connection is by opto
cable. Minimum center distance 60 mm.
Each unit is prepared with an independent
double-sided trigger. The adjustment of the
stapling depth is stepless from 0-100 mm.
Stapling occurs automatically when the stapling
material is inserted. A foot control is incorporated
in Rapid 106 and is available as an extra acces-
sory to Rapid 105.
The units have easily exchangable insert
staplers.
Radio interference suppression device is
provided.
DIMENSIONS
Rapid 105
Width: 60 mm (incl base 100 mm)
Length: 250 mm (incl base 255 mm)
Height: 238 mm (incl base 245 mm)
Weight: 3,6 kg
Rapid 106
(excl table)
Width: 60 mm,
(Anvil: 84 mm)
Length: 250 mm
Height: 438 mm
Weight: 4,2 kg+foot
control: 0,7 kg
STAPLES
C. Original Rapid staples 66/6 and 66/8, 210
staples per magazine.
EXTRA ACCESSORIES
D. Opto cable for the connection of two or more
units.
EXTRA ACCESSORIES FOR RAPID 105
E. Foot control.
F. Vice for adjustable fixing to a table top.
Table
(supplied)
Width: 250 mm
Length: 150 mm
Weight: 0,7 kg
4
G. Multi base for adjustable fixing of up to 4 sta-
plers together, (size 145_300 mm). Two devices
for fixture are included.
EXTRA ACCESSORIES FOR RAPID 106
H. Narrow table (60 mm) with exchange anvil,
provided with 2 paper gauges which can
also be used for the fixing of coupled
units.
I. Runner with accessories for saddle stapling,
for one or more staplers.
J. Rapid 252-106 insert stapler for loop staples
(Rapid 66/6R).
K. Loop staple type Rapid 66/6R.
2
POWER SUPPLY CONNECTION
The voltage is specified on the identification plate
(ringed in picture). Before connecting the unit
make sure that the socket has the correct voltage.
Switch off main switch when not in use.
Note: For 115 V version.
If the stapler is connected to the same mains out-
let as appliances drawing heavy current, such as
photocopiers, they may give rise to such a heavy
voltage drop when in operation that stapling is
disturbed.
STAPLES
Use only original Rapid staples 66/6 or 66/8. The
wrong type of staples can damage the unit or may
result in bad stapling.
3
LOADING
1. Lift the sight-shield (3) - stapling is now pre-
vented.
2. Depress the magazine release (7) on the front
of the insert stapler and pull out the magazine
(6).
3. Load with staples Rapid 66/6 for goods of bet-
ween 0 and 2 mm's thickness (equals up to
about 20 sheets of copying paper 80 g/m2) or
Rapid 66/8 for goods of 2-5 mm's thickness
(up to about 50 sheets).
4. Push in the magazine to the locked position.
5. Lower the sight-shield.
4
ADJUSTING THE THROAT DEPTH
The unit is provided with a double-sided trigger.
Each trigger can be used independently.
1. Lift the sight-shield (3).
GB
Werbung
Inhaltsverzeichnis
