AVENLI SPA3 Benutzerhandbuch Seite 11

Assembling
1) Unfold the inflatable
spa over the base
protector.
4) Connect the inflation
hose to the pump on the
socket.
7) Wait 60 seconds for
SPA shaping
10) Screw the cap firmly in
place.
2) Before inflating, assemble
connecting tube into SPA
pool
5) Insert the inflation hose
into the inflatable spa.
8) Complete inflating and
remove the inflate tube
11) Connect the unit pump
to the pool using the 3
connectors to screw. Ensure
the icons on the pump and
the pool match up.
3) Inspect spring inside
valve in the upspring
status
6) Connect the pump unit
then press the button to
inflate the spa.
9) Insure valve tightened
by tools.
12) Cartridge location as
shown.