Maintenance, Care, Transport - SXT-Scooters BEAST PRO Handbuch

MAINTENANCE - CARE - TRANSPORT
- Use suitable cleaning and care products and a soft sponge.
- Never use solvents.
- Never aim a direct jet of water at the following components: headlight, switch on the handle-
bar, brake lever, battery, charger.
- After washing, wipe with clean water to remove any cleaning residue.
- Dry with a leather cloth.
Storage and daily care:
Always ensure that all cables and brake cables are functioning properly when outside temper-
atures are around freezing point. Do not park the scooter in the blazing sun or rain. Keep the
vehicle clean and dry. Clean the scooter only with a soft cloth and without aggressive cleaning
agents.
After cleaning:
Carry out a few braking operations with extreme caution in a place safe for traffic. The water
on the braking surfaces will reduce the braking performance for a short time.
Please keep your SXT Scooter away from sun and rain.
Regularly check the screws and small parts on your scooter.
Do not use alcohol, gasoline, acetone, or other chemical solvents to clean the scooter or it may
corrode.
Pay attention to regular maintenance and inspection of the individual parts.
Transportation:
When transporting the scooter does not need to be packed!
Simply fold up the scooter.
| 50 |
MANUAL
Cleaning:
Please never wash the scooter with a water hose!
To reliably prevent rust, it is recommended to thoroughly clean and dry
the vehicle after driving in the rain. The use of rust inhibitors is strongly
recommended.