Charge Battery; Battery Charging - SXT-Scooters BEAST PRO Handbuch

CHARGE BATTERY

Loading instructions
The scooter should be charged in a well-ventilated room at a normal average temperature. First
connect the charger to a standard power outlet, then connect the charging cable to your SXT
scooter. When everything is connected, the red indicator on the charger will light up. The battery
is full when the indicator light changes from red to green. At this point, you can remove the char-
ger and replace the protective cover.
1. The safety protection for the charging port should be replaced after the scooter is charged.
2. The scooter should be kept out of the reach of children during charging.
3. Under no circumstances should a charger other than the supplied one be used to charge the
scooter. In addition, the supplied charger should only be used for this scooter.
4. under no circumstances should a non-functioning charger be disassembled. Please contact the
dealer.
5. the battery compartment should not be opened to avoid damaging parts inside the battery. If
the battery does not charge, please contact the dealer.
6. to keep the battery in good condition, it should be charged at regular intervals, every 20-30
days.
7. Please remember to charge the battery after each use. If the battery is completely discharged,
it may be damaged.
8. Do not connect the charger to the scooter when the charging cable or charging port is wet.
To enable faster charging, simply use a second charger.
Charging sockets
| 48 |
MANUAL