Troubleshooting; Optional Accessories - Makita CL002G Betriebsanleitung

Troubleshooting

Before asking for repairs, check the following points.
Symptom
Weak suction power
Not working
Abnormal noise and vibration come
out
Dust case cover does not close
CAUTION:
Do not attempt to repair the cleaner by yourself.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Extension wand (Straight pipe)
• Nozzle
• Nozzle for carpet
• Shelf brush
• Corner nozzle
• Round brush
• Flexible hose
• Dust bag
• Paper filter
• Free nozzle
• Seat nozzle
• Crevice nozzle
• Wall mount for cordless cleaner
• Cyclone attachment
• Tool bag
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
Area to be investigated
Is dust bag or paper filter full of dust?
Is dust bag or sponge filter clogged?
Is paper filter clogged?
Is battery cartridge discharged?
Is battery cartridge discharged?
Is dust bag or sponge filter clogged?
Is paper filter clogged?
Anything to block openings or holes?
Is suction inlet of nozzle or pipe closed?
Is dust bag or paper filter set?
16 ENGLISH
Empty dust bag or paper filter.
Dust down or wash dust bag and sponge
filter.
Replace paper filter.
Charge battery cartridge.
Charge battery cartridge.
Dust down or wash dust bag and sponge
filter.
Replace paper filter.
Clean any dust and objects out of nozzles,
pipes and air openings.
Uncover and open suction inlet of nozzle
and pipe.
Set dust bag or paper filter.
Cyclone attachment
► Fig.44: 1. Release button 2. Hook 3. Extension
wand (Straight pipe) 4. Cyclone attachment
5. Suction inlet
About the cyclone attachment
Using the cleaner with the cyclone attachment installed
reduces the amount of dust that enters the dust bag,
which helps to prevent the suction force from weaken-
ing. In addition, cleaning after use is also simple.
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool. If the
battery cartridge is left inserted, the cleaner may start
unexpectedly and result in injury.
CAUTION:
Clean the mesh filter of the
cyclone attachment and the dust bag of the
cleaner unit when they become clogged.
Continued use in the clogged condition may result in
heating or smoke.
NOTICE:
When the cyclone attachment is
attached, do not use the cleaner in the horizontal
or upward facing condition. Doing so may cause
the mesh filter to become clogged.
NOTICE:
Always use the cleaner with the dust
bag installed, even when using the cyclone
attachment. Using the cleaner without the dust bag
installed may result in a motor malfunction.
Fixing method