Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instructions
Key Box with Combination Lock, 20 Keys, White
Item no: 2368869
1 Intended use
The product is a wall mounted key box with combination lock.
Contact with moisture must be avoided to prevent corrosion.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to
third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
2 Delivery contents
■
Product
■
Numerical index label
■
2x screws
■
2x dowels
■
20x key rings (4x black, 4x red, 3x yellow, 3x green, 3x blue, 3x white)
■
Operating instructions
3 Latest product information
Download the latest product information at
low the instructions on the website.
4 Description of symbols
The symbol with the exclamation mark in the triangle is used to indicate important informa-
tion in this document. Always read this information carefully.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety informa-
tion. If you do not follow the safety instructions and information on proper handling,
we assume no liability for any resulting personal injury or damage to property. Such
cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous playing mater-
ial for children.
■
If you have questions which remain unanswered by this information product, contact our technical
support service or other technical personnel.
5.2 Handling
■
If it is no longer possible to operate the product safely, take it out of operation and protect it from any
accidental use. Safe operation can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
■
Consult an expert when in doubt about the operation, safety or connection of the appliance.
5.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
■
Protect the product from high humidity and moisture.
■
Protect the product from direct sunlight.
6 Installation
Important:
– When penetrating the surface e.g. drilling or inserting fasteners, make sure no cables or
pipes are damaged.
– Inadvertently penetrating electric cables causes the life-threatening danger of an electric
shock!
P
:
RECONDITIONS
a
Surface should be solid, level, and of suitable material.
1. Use the mounting holes on the back of the product as a template to mark where to drill.
2. Drill holes on the marked positions.
3. Attach the product using the supplied dowels and screws.
2
www.conrad.com/downloads
or scan the QR code shown. Fol-
7 Operation
Important:
– The unlock code should be changed from the factory default "000" as soon as possible.
– When entering the unlock combination, cover the numbers with your hand or body to pre-
vent others from seeing the code.
7.1 Unlock
1. Set the numbers to the correct unlock code. Make sure the numbers are lined up correctly.
2. Turn the dial to open the door.
7.2 Lock
1. Close the door.
2. Turn the dial to lock the door.
3. Scramble the numbers.
7.3 Change unlock combination
1. Unlock the product and open the door. See section
2. Leave the number dials at the unlock combination.
3. Slide the RESET switch from position A to B.
4. Set the number dials to a new unlock combination.
5. Slide the RESET button back to position A to activate the new combination.
8 Cleaning and care
Clean the product with a dry, fibre-free cloth.
NOTICE! Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
9 Technical data
Locking mechanism ................................ 3-dial combination lock
Material ................................................... Steel
Operating temperature .......................... -20 to +60 °C
Operating humidity ................................ 40 – 85 % RH
Storage temperature ............................. -20 to +60 °C
Storage humidity .................................... 40 – 85 % RH
Dimensions (W x H x D) ......................... 160 x 200 x 85 mm
Weight (approx.) .................................... 750 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2368869_V1_0621_dh_mh_en
Unlock [} 2]
.
Werbung
