Maintenance - Disan MATRIX Bedienungsanleitung

7. Maintenance

7.1 Technical advice
If during operation an irregularity is experienced that is not dealt with in following section
"maintenance of central unit" , please switch off the cleaner and get it inspected by a quali-
fied customer service.
No maintenance or repair work should be carried out on the central unit unless it is discon-
nected from the main power supply.
Disan recommend a general check of the electric motor, bearings, cables every 4/5 years.
7.2 Ordinary maintenance.
All this operations have to be carried out on the central unit disconnected by the main power
and when the cleaner and other parts are chilled form the surrounding temperature. This
maintenance is made to keep the cleaner working properly and to extend the lifetime of the
cleaner.
Emptying of dust container
Modell Matrix PT:
1. Open the front panel, which is closed with quick-fix magnets.
2. Remove the disposable paper-bag filter, close it with the flap and waste in the proper trash.
3. Clean the motor protection by shaking and knocking
The cleaning of motor protection can be done also with cold water, but before use pay
attention this must be completely dry.
4. Before inserting a new paper bag filter shake it until it takes the maximal volume.
Beware that rubber joints are in a good shape and they are in the proper place.
5 Close the front panel
39