jbc CP-2E Bedienungsanleitung Seite 11

Tool Settings
Parameter description
Fix one temperature
Fix a value within the
temperature range of the
station (90-450ºC/190-840ºF).
Temperature levels set
Similar to "Fix one temp"
parameter. In this case, the
user can set up to 3 values for
different power requirements.
Sleep delay
Set the time that the tool
will remain at the selected
temperature when in the stand
before entering sleep mode.
The tip temperature will then
drop to the Sleep temperature.
Sleep temperature
This is the set temperature the
tip reaches when returned to
the stand.
All manuals and user guides at all-guides.com
Recommendations
Ideal for soldering more than
one component at a specific
temperature. The station will
reject any attempt to change
the temperature.
This allows a quick change
between 3 different
temperatures. Set them
according to the allowed
values for your soldering
applications.
Because our tools reach the
working temperature from the
default Sleep mode in only a
few seconds, this parameter is
preset to 0 min. Once the tool
is returned to the stand the
temperature will automatically
drop to the sleep temperature,
extending tip life and avoiding
oxidation. Retinning the tip
before placing the tool in the
stand will protect the tip and
extend its life.
The sleep temperatures are
set to achieve a balance
between preventing oxidation
and reaching the working
temperature in a few seconds.
w w w.jbctools.com
Warnings
N/a
N/a
Setting these
parameters to higher values
will unnecessarily accelerate
oxidation and shorten tip life
especially when working
with temperatures up to
450°C (840°F).
11