Troubleshooting - dB Technologies VIO S 115 Bedienungsanleitung

English
CAUTION!
•
Never suspend the subwoofer from the handles on the rear! Always use brackets and
accessories approved by the manufacturer.
•
If the subwoofer is to be used outdoors, we recommend that the system is securely
anchored to prevent movement due to wind or atmospheric agents

5. TROUBLESHOOTING

The subwoofer does not power up:
1. Check that the system is connected to a working power supply.
2. Check that the power supply or power supply link connector is inserted correctly.
The subwoofer powers up but does not emit any sound:
1. Check that the audio signal input or audio signal link connections are made correctly.
2. Check that the Sub Attenuation is set to 0 dB.
3. Check that the connection cables are not damaged.
4. Check that the audio source (mixer) is connected correctly and clearly shows an output signal.
5. If there is an RDNet network connection, check that the MUTE function is disabled.
The subwoofer emits an unsatisfactory sound:
1. Check the design, installation specifications and configuration using predictive software.
2. Check that the Xover, Polarity and Delay parameters are set correctly and have effectively been copied onto
the subwoofer control panel (especially when not using remote control).
3. If there is an RDNet network connection, check that all parameters are set correctly.
VIO S115 Cod. 420120357 REV. 1.0
37