▶ Do not connect the product
via the plug.
1.3.13 Qualification
Only qualified electricians may
carry out the electrical installa-
tion.
1.4 Electrical specifications
▶ Ensure that the nominal
mains voltage complies with
the specifications on the data
plate.
▶ Ensure that the cable for the
house installation is connec-
ted to an electrical partition
with a contact gap of at least
3 mm (e.g. fuse or power
switch).
▶ Use a line with suitable di-
mensions to connect the
product to the protective con-
ductor.
▶ Install line protection.
1.5 Regulations (directives,
laws, standards)
▶ Observe the national regula-
tions, standards, directives,
ordinances and laws.
0020323584_00 Installation and maintenance instructions
15