Explanation Of Symbols; General Safety Warnings; Symbols In Manual - Kyocera TJEP PQZ-75 Sicherheits- Und Bedienungsanleitung

Explanation of symbols

The safety alert symbol indicates a potential hazard to personal injury.
!
WARNING: Indicates a hazard which, if not avoided, could result in death or serious injury.
Read and understand tool labels and manual. Failure to follow warnings could result in serious
injury.
Operators and others in work area shall wear impact-resistant eye protection with side shields.
Operators and others in work area shall wear hearing protection.
It is recommended that operator and others in work area wear CE-marked helmet at the job site.
Exercise caution as fastenings are being fired.
Symbols on tool
DANGER
!
Tool actuation: Full
sequential actuation
This tool is CE-approved according to
applicable standards.
Operators and others in work area shall
waer hearing protection.
Read and understand tool labels and
manual. Failure to follow warnings
could result in serious injury.
!

General safety warnings

General safety warnings
• WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and in-
structions may result in electric shock, fire, serious
injury and/or death.
• Use the gas tool and accessories in accordance with
these instructions, taking into account the working
conditions and the work to be performed. Use of the
gas tool for operations different from those intended
could result in a hazardous situation.
• Stay alert, watch what you are doing and use
common sense when operating the gas tool. Do
not use the gas tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating the gas tool may result
in serious personal injury.
• The risks to others shall be assessed by the operator.
• Use CE-marked eye protection with front and
side protection against flying objects when han-
dling, operating, and servicing the gas tool.
6

Symbols in manual

Important! Improper use
will result in death or serious
injury.
Only full sequential actuation
is available for this tool.
Operators and others in work area shall
wear impact-resistant eye protection
with side shields.
Do not store the gas tool in tempera-
120°F
50°C tures above 49°C(120°F).
Extremely flammable
Dispose product according to the
WEEE directive.
7.2
Battery supply voltage
• Use CE-marked ear protection near or at the
job site to prevent hearing damage. Unprotected
exposure to high noise levels can cause perma-
nent, disabling, hearing loss and other problems
such as tinnitus (ringing, buzzing, whistling or
humming in the ears). Appropriate controls to re-
duce the risk may include actions such as damping
materials to prevent workpieces from "ringing".
• It is recommended to wear CE-marked head
protection at the job site.
• It is employer's responsibility to enforce gas tool
users and all other nearby personnel at the job site
to wear personal protective equipment such as eye
protection, dust mask, non-skid safety shoes, hard
hat and/or hearing protection.
• Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from
moving parts to avoid serious injuries. Only wear
gloves that provide adequate feel and safe control
of trigger and any adjusting devices. Wear warm
clothing when working in cold conditions, to keep
your hands warm and dry.