TensCare Elise 2 Bedienungsanleitung Seite 31

Operating:
Storage:
TYPE BF
EQUIPMENT
IP22
Applied Part
Contact duration: At least 10 minutes.
Note: The electrical specifications are nominal and subject to variation from
the listed values due to normal production tolerances of at least 5%.
Note: At least 30min required for the device to warm / cool from the minimum
/ maximum storage temperature between uses until it is ready for intended
use.
Temperature range: 5 to 40⁰C
Humidity: 15 to 90% RH non-condensing
Atmospheric pressure: 700hPa to 1060hPa
Temperature range: -10 to 60⁰C
Humidity: 15% to 75% RH non-condensing
Atmospheric pressure: 700hPa to 1060hPa
Equipment providing a degree of protection against electric
shock, with isolated applied part.
This symbol on the unit means "Refer to Instructions for Use"
The unit is not water resistant, and should be protected from
liquids.
Complies with EU WEEE regulations
Vaginal and anal electrodes. Optional skin surface electrode
pads. See section 17.
30