Klarfit 10009109 Anleitung Seite 16

How to pull tension cable from front post
Picture 1 Take the lower Computer Wire and Tension Cable
Picture 2 Connect the Middle Computer Wire with Lower Computer Wire
Picture 3 Pull Tension Cable from front post
Picture 4 & 5 Attach the cable to the rear of the Tension Knob by inserting the end of the
tension wire into the clasp on the end of the lower tension cable then pull upwards and
insert the end of the outer cable into the top of the U shaped bracket. Please note at this
stage you may need to pull the handlebar post upwards with some force to increase the
length of the cable.
Picture 6 &7 Place the Tension knob housing into the front post fix in place by using the
screw
16