Klarfit 10009109 Anleitung Seite 15

Assembly
Step 1
Attach the Front Stabilizer (5) to the
main frame (1) fasten and secure car-
riage bolts (58) with Curve washer (59)
and Domed nut (60).
A) Attach the Rear Stabilizer (4) to the
main frame (1) fasten and secure carri-
age bolts (58) with Curve washer (59)
and Domed nut M8 (60).
Step 2
Take the Front Post (2) and join the
Middle Computer Wire (56) with Lower
Computer Wire (57). Attach the Front
Post (2) with Frame (1) and tighten with
x 4 Allen Bolt (61) and Curve Washer
(59).
Pull Tension Cable (33) from Front Post
(2) and out from the hole on the upside.
Connect the Tension Cable (33) with
Tension Knob (32) like the arrow direc-
tion. Then fasten the Tension Knob by
the Washer (40) & Screw (39).
15