Sunny Health & Fitness PRO II SF-B1964 Bedienungsanleitung Seite 17

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-
.
907-8669)
STEP 6:
Remove the preassembled Phillips Screw
(No. 64) from Handlebar (No. 7). Then
attach Handlebar Cover (No. 97) to
Handlebar (No. 7) using the Phillips
Screw (No. 64) that were just removed.
Tighten and secure with Spanner (No.
104).
Connect Pulse Wire (No. 18) and Sensor
Wire (No. 101) to the relative wires of
Meter (No. 96). Then insert the Meter (No.
96) to the bracket of the Handlebar Post
(No. 6).
STEP 7:
Remove the preassembled 4 Phillips Flat
Head Screws (No. 65) and 4 Flat
Washers (No. 66) from Main Frame (No.
1).
Then attach the Bottle Holder (No. 61) &
Dumbbell Rack (No. 62) to Main Frame
(No. 1) using the 4 Phillips Flat Head
Screws (No. 65) and 4 Flat Washers (No.
66) that were just removed. Tighten and
secure with Spanner (No. 104).
The assembly is complete!
16