Delivery Scope; Intended Use; Technical Data; Declaration Of Conformity - Bosch GHA FC2 Professional Originalbetriebsanleitung

OBJ_BUCH-2307-002.book Page 8 Tuesday, March 3, 2015 9:09 AM
8 | English
Symbol Meaning
Always wear ear protection.
Wear safety glasses/goggles
Movement direction
Reaction direction
Next step of action
Prohibited action
Hammer Drilling
Switching On
Switching Off
Low speed/impact rate
High speed/impact rate
Right/left rotation
Tool holder
U Rated voltage
E Impact energy per stroke according to
EPTA-Procedure 05/2009
n Rated speed
n Impact frequency at rated speed
S
Concrete
Ø Drilling diameter, max.
Weight according to EPTA-Procedure
01/2003
Audible engagement (multiple)
* Value dependent of the battery pack
being used
1 609 92A 0YJ | (3.3.15)
Symbol Meaning
L Sound power level
wA
L Sound pressure level
pA
a Vibration total value
h
K Uncertainty

Delivery Scope

Hammer adapter with auxiliary handle.
Application tools and other accessories shown or described
are not part of the standard delivery scope.
A complete overview of accessories can be found in our ac-
cessories program.

Intended Use

The power tool (GSR 14,4 V-EC FC2/GSR 18 V-EC FC2 with
GHA FC2 hammer adapter) is intended for hammer drilling in
concrete, brick and stone.
The GHA FC2 hammer adapter must be used only with the
GSR 14,4 V-EC FC2 and GSR 18 V-EC FC2 cordless
drill/drivers.

Technical Data

The technical data of the machine are listed in the table on
page 128.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2009/125/EC (Regulation
1194/2012), 2011/65/EU, until 19 April 2016:
2004/108/EC, from 20 April 2016 on: 2014/30/EU,
2006/42/EC including their amendments and complies with
the following standards: EN 60745-1, EN 60745-2-6.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
Leinfelden, 17.12.2014

Noise/Vibration Information

The measured values of the machine are listed in the table on
page 128.
Sound emission values determined according to
EN 60745-2-6.
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-6.
Bosch Power Tools