Delivery Scope; Intended Use; Technical Data; Declaration Of Conformity - Bosch PSB 14,4 LI-2 Originalbetriebsanleitung

10 | English
Symbol Meaning
Article number
Read all safety warnings and all instruc-
tions
Before any work on the machine itself,
remove the battery
Always wear ear protection.
Movement direction
Reaction direction
Drilling and screwdriving
Impact drilling
Low speed
High speed
Switching On
Switching Off
Right/left rotation
U Rated voltage
n Impact rate
S
n 1 No-load speed (1. gear)
0
n 2 No-load speed (2. gear)
0
M Maximum torque according to ISO 5393
Brickwork
Metal
Wood
Ø Drilling diameter, max.
Ø Max. screw dia.
Chuck clamping range
2 609 007 103 | (14.2.13)
Symbol Meaning
Weight according to EPTA-Procedure
01/2003
L Sound power level
wA
L Sound pressure level
pA
K Uncertainty
a Vibration total value
h

Delivery Scope

Combination cordless drill.
Battery, application tools and other accessories shown or de-
scribed are not part of the standard delivery scope.
A complete overview of accessories can be found in our ac-
cessories program.

Intended Use

The machine is intended for driving in and loosening screws
as well as for drilling in wood, metal, ceramic and plastic and
for impact drilling in brick, brickwork and masonry.

Technical Data

The technical data of the machine are listed in the table on
page 63.
Please observe the article number on the type plate of your
machine. The trade names of the individual machines may
vary.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
05.02.2013

Noise/Vibration Information

The measured values of the machine are listed in the table on
page 63.
Noise and vibrational values (vector sum of three directions)
determined according to EN 60745.
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Bosch Power Tools