Electrical Safety - Zoef Robot Dirk Gebrauchsanweisung

Always switch o the product when it is
•
not in use. The product can only start
when the correct PIN code has been
entered.
• The product must never be used at the
same time as a sprinkler. Use the
Schedule function so the product and
sprinkler never run simultaneously.
• Metal objects in the ground (for
example buried electrical cables) can
result in a stoppage. The metal objects
can cause interference with the loop
signal which then can lead to a
stoppage.
• Be aware that pets may dig or disrupt
the perimeter wire, so check regularly.
• AYI does not guarantee full
compatibility between the product and
other types of wireless systems such as
remote controls, radio transmitters,
hearing loops, underground electric
animal fencing or similar.

Electrical safety:

• Do not operate the mower in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Mowers can sometimes create sparks,
which may ignite the dust and fumes.
• Avoid body contact with earthed or
grounded surfaces, such as pipes. There
is an increased risk of electric shock if
your body is earthed or grounded.
• In the event of a thunderstorm: To
reduce the risk of damage to electrical
components in the product and the
charging station, we recommend that all
connections to the charging station are
disconnected (power supply, boundary
wire and guide wire) if there is a risk of a
thunderstorm.
• Do not handle the charge station or the
mower with wet hands.
• Regularly check the power supply and
charge station cables for signs of
damage or ageing.
• Do not expose the mower to tempera-
tures exceeding 80ºC, for example
leaving the mower in direct sunlight or
in the hot boot of a car for prolonged
periods.
Battery safety:
• This product contains Li-Ion batteries.
Do not incinerate batteries or expose to
high temperatures, as they may
explode.
• After heavy use or in high temperatures
the battery may become warm. Allow
the product to cool for 30 minutes
before charging.
• Operation and storage temperature is
0-50 °C / 32-122 °F. Temperature range
for charging is 0-45 °C / 32-113 °F. Too
high temperatures might cause damage
to the product.
Service:
• Check all visible fixing screws and nuts,
especially on the cutter disc, to ensure
they are tightened properly.
• The mower and its charge station
should be periodically checked and
cleaned and kept free of debris and
obstructions. Note that some garden
creatures such as spiders, insects,
snails and slugs can nest or hibernate
within crevices of the mower. These
can attract small creatures / rodents
that can damage the mower if not
deterred.
• Before using the mower and after any
impact, check for signs of wear and
damage and repair or replace as
necessary.
• Use only genuine replacement parts.
This will ensure that the safety of the
mower is maintained.
• Do not attempt to repair any damaged
parts on the mower unless you are
qualified to do so.
- 3 -
User Manual