Installing The Charging Station - Zoef Robot Dirk Gebrauchsanweisung

Installing the charging station

Min 2m
Ensure a minimum of 2m straight
perimeter from the front of the
charging station, and 30cm straight
from the rear.
Find a location with access to power,
ensuring the mower can leave the
charging station in an anti-clockwise
direction. Don't peg the plate down yet.
WARNING:
Trailing wires are a trip hazard. Take care when choosing your location.
1
The boundary wire goes
into the front (1) of the
charging station and
comes out at the back
(2).
Min 30cm
2
1
Push the boundary wire
into the tube at the front
(1) of the charging
station.
Safe power source
The location must be within 5m of a
safe power source – either a w
eatherproof outdoor electrical socket
power point in a garage, for example.
or an indoor.
The location of the charging
station should be at and secure, without
risk of movement, if placed next to a
border edge that is unstable it can slump
and cause the station to be uneven, this
will cause problems for the mower when
returning to charge.
It will emerge at the rear
of the unit (2).
- 8 -
User Manual
2