Werbung
Introduction and safety
Introduction
Congratulations on your choice for a Zoef Robot with exceptional
high-quality product. This battery powered mower using a micro computer, timer
Mainly intended for household lawn mowing and maintenance.
To get the best results from your Harm robot mower requires knowlegde of
its function. This operator's manual contains important information about
the mower, how it should be installed and how to use it.. If any doubt, you can
seek for further information on our website; www.zoefrobot.nl
Symbols on
MR40Z
These symbols can be found on the lawn mower. Study them carefully so
that you understand their significance.
Read through the Op-
The warnings and
erator's Manual care-
safety precautions in
fully and understand
this Operator's Man-
the content before
ual must be carefully
using your
robot
followed if the mower
is to be used safely
Objects may be thrown
Keep children, pets
from mower while
and bystanders away
operating, keep a safe
from mower when
distance from the
operating.
machine when oper-
ating, take caution.
4
MANUAL · MR40Z
Harm can only start
Inspection and main-
when the anti-theft
tenance must be car-
KEY is correctly
ried out with power
plugged in.
switch turned to OFF.
Keep your hands and
Do not ride on
harm
feet away from the
rotating blades.
Safety instructions
Read the Operator's Manual carefully before use.
Keep it well for future reference.
Training
a. Read the instructions carefully. Be familiar with the controls and the proper use of the machine.
b. Never allow people unfamiliar with these instructions or children to use the machine. Local regulations may
restrict the age of the operator.
c. The operator or user is responsible for accidents or hazards occurring to other people or their property.
Preparation
a. The charging adapter is designated for indoor use only. Please always keep it clean, ventilated and away from
moisture.
b. Ensure the correct installation of the boundary wiring as instructed.
c. Inspect regularly the area where the machine is to be used and remove all stones, sticks, wires, bones and oth-
er foreign objects.
d. Check regularly that the blades, blade bolts and cutter assembly are not worn or damaged. Replace worn or
damaged blades and bolts in sets to maintain correct balance.
Operation
a. Do not put hands or feet near or under rotating parts.
b. Never pick up or carry a machine while the motor is running.
c.
fore clearing an obstacle
fore checking, cleaning or working on the machine.
NB: Do not leave the machine to operate unattended if you know that there are pets, children or people in the
vicinity.
Maintenance and storage
a. It is strictly prohibited to flush water at the bottom of the robot. The bottom shall be cleaned with a brush/
cloth.
b. Keep all nuts, bolts and screws tight to be sure, the machine is in safe working conditions.
c. Replace worn or damaged parts for safety.
d. Ensure that only authorized parts are used when replacing knives and bolts.
e. Ensure that batteries are only charged using the correct charger/adaptor recommended by the manufacturer.
Incorrect use may result in electric shock, overheating or leakage of corrosive liquid from the battery.
f. In the event of leakage of electrolyte, flush with water or neutralizing agent and seek medical help if it comes
into contact with the eyes, etc.
g. Servicing of the machine should be according to manufacturer's instructions
See also page 13: Maintenance and Winter Storage.
MANUAL · MR40Z
5
Werbung
Kapitel
