Versions; Supplied Equipment; Associated Equipment; Recommended Tools - Eaton 2400-Serie Installationsanleitung

EATON
2.0 Description (continued)
The project requirements and unit certification label must be checked by the installer before
installation, to confirm that the product supplied is suitable for the intended installation zone
and environment.
Manufactured in accordance with CE & IEC norms
EN 60079-0:2012, EN 60079-1:2014, EN 60079-28:2015 & EN 60079-31:2014, IEC 60079-0:2011,
IEC 60079-1:2013 & IEC 60079-31:2014
2.1

Versions

There are various camera configurations available within the range; these include Day/Night
cameras with optional wiper, integral washer or external washer, Thermal Imager and Dual
Camera Day/Night and Thermal units.
The range also includes options for Standard Analogue Video and Data, HD IP cameras, Hybrid IP
encoders, Digital Fibre optic convertors and Media convertors.
Due to the large variations of possible configurations, this manual only covers the standard
installation of the units.
For detailed connection and configuration of units, the installer should refer to individual project
specific drawings and information.
In addition to this manual there are various addendums available that cover the specific function
of electronics that can be included within the camera assemblies.
2.2

Supplied Equipment

Contained in the package are the following items:

Camera system

Installation/Technical Manual

Optional Sunshield and Fixings

Optional Washer Nozzle Kit
2.4

Recommended Tools

For installation and maintenance purposes, we recommend the following hand tools:

Voltmeter/Ohmmeter

Torque wrench kit

Spanners

Screw drivers

Pliers
2.5

Recommended Spares

For Maintenance purposes, we recommend the following spares:
OX10-00188 EX Base Cable Entry Seal Kit (50.8x3.53 O-ring + 5x M5x12 A4 socket head screws)
OX10-00190 EX Main Flange Seal Kit (117.07x3.53 O-ring + 5x M6x16 A4 socket head screws)
OX10-00008 WIPPER BLADE ASSEMBLY
OX10-00062 HOUSING WASHER NOZZLE ASSEMBLY
OX10-00063 XP20 CONTINUOUS ROTATION WASHER NOZZLE ASSEMBLY
OX10-00134 XP40 CONTINUOUS ROTATION WASHER NOZZLE ASSEMBLY
© 2018, Eaton
Installation & Maintenance Instructions
Set to 7.5Nm, Hex Allen wrench bits of 5, 4 & 3mm
8mm, 10mm & 13mm A/F
standard and Phillips head
side cutting and long nose
IMI+70-XF-XC-XP-XT Issue 8
Page 6 of 43