Mounting The Xf Series - Eaton 2400-Serie Installationsanleitung

IMI+70-XF-XC-XP-XT Issue 8
EATON Installation & Maintenance Instructions
3.2.3

Mounting the XF Series

The XF Series fixed housing assemblies may be mounted onto various structures such as
bulkheads, walls or towers. The units have a mounting plate on the bottom of the housing tube
that have
four (4) No. M6 Threaded fixing points. (Fig 6)
The type and size of these fixings to be supplied by the user/installer and must be suitable for
the specific installation requirements.
To gain flexibility of the cameras view direction one of the EATON is needed, these comprise of
the BFP00SW Swivel joint (Fig 7), the BFW32SW (Fig 8) or a combination of the BFW5000 and
BFP00SW. (Figs 4 & 7)
Depending on Housing length, some wall brackets do not allow for the camera to view directly
away from the Wall and must be rotated or tilted to allow room for gland entry.
Fig.6 XF60VN Example XF Series unit showing mount plate fixing points
Fig.7 BFP00SW Swivel Joint & Pole Top Adaptor
Fig.8 BFW32SW Swivel Joint & Pole Top Adaptor