Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance; Corrosion Protection - Eaton 2400-Serie Installationsanleitung

Feuerfeste kameragehäuse und schwenk- und neigeeinheiten
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

EATON
4.0

Maintenance

Recommended inspection interval: 6 Months.
Inspect the unit every six months to ensure trouble free operation and extend product life.
Due to the rugged construction of the unit, little or no maintenance should be required.
However when the unit is exposed to extreme weather conditions the 'O' ring weather seals
may need replacement approximately every five years.
Fixings and fastenings should be checked for tightness and integrity at regular intervals.
All cable entries and cables should be checked for integrity at regular intervals.
Extremely Harsh Environments may require more frequent inspection and maintenance
checks.
At every Inspection carry out the following:
Clean the unit.
Check the 'O' ring weather seals and replace if necessary.
Check and if necessary replace the washer nozzle.
Check and if necessary replace the window wiper blade assembly.
Please read and be familiar with the instructions before servicing the Pan/Tilt or housing.
4.1

Corrosion Protection

Although all external metal components are produced from 316L Stainless Steel, if the units
are not correctly maintained, handled and cleaned there is the possibility of mild
discolouration due to Oxidation.
If ferrous metal equipment is used when handling the units, small ferrous deposits could be
left on the stainless steel or if ferrous metal particles come to rest upon the units from
nearby works, this can cause accelerated corrosion of the ferrous deposits and discolour the
units due to oxidation. In the event of ferrous deposits, the units should be cleaned
immediately following EATON guidelines.
In atmospheres that are high in corrosive particles the units should be cleaned every 3 to 4
months using only EATON recommended cleaning products and procedures. (contact EATON
for details)
EATON takes no responsibility for oxidisation due to failure in correctly following cleaning
procedures.
© 2018, Eaton
Installation & Maintenance Instructions
IMI+70-XF-XC-XP-XT Issue 8
Page 17 of 43

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

1400-serieXp-serieXt-serieXc-serieXf-serie

Inhaltsverzeichnis