Using A Wired Connection To The Tv; Method 1. Connecting With Hdmi; Connecting The Tv That Supports Hdmi Arc (Audio Return Channel) - Samsung HW-Q800A Bedienungsanleitung

05 USING A WIRED CONNECTION TO THE TV

Method 1. Connecting with HDMI

CAUTION
• When both the HDMI cable and optical cable are connected, the HDMI signal is received first.
• To connect the HDMI cable between the TV and Soundbar, be sure to connect the terminals marked ARC. Otherwise, the TV sound may not
be output.
• The recommended cable is High Speed HDMI Cable with Ethernet.

Connecting the TV that supports HDMI ARC (Audio Return Channel)

1. With the Soundbar and TV turned off, connect the HDMI cable as shown in the figure.
2. Turn on the Soundbar and TV.
3. "TV ARC" appears in the display window of the Soundbar main unit and the Soundbar plays TV sound.
• When the TV sound is not output, press the
control to select the "D.IN" mode. The screen displays "D.IN" and "TV ARC" in sequence, and TV sound is played.
• When connecting a TV that supports the eARC function, "eARC" appears on the display and the sound is heard.
• To connect with eARC, the eARC function in the TV menu should be set to On. Refer to the TV user manual for details on setting. (e.g.
Samsung TV : Home (
• If "TV ARC" does not appear in the display window of the Soundbar main unit, confirm that the HDMI cable is connected to the correct port.
• Use the volume buttons on the TV's remote control to change the volume on the Soundbar.
NOTE
• When you connect the TV that supports the HDMI ARC (Audio Return Channel) to the Soundbar with an HDMI cable, you can transmit the
digital video and audio data without connecting a separate optical cable.
• We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one whose diameter is less than 14 mm.
• This function is not available if the HDMI cable does not support ARC.
• When the audio in a broadcast is encoded in Dolby Digital and the "Digital Output Audio Format" on your TV is set to PCM, we recommend that
you change the setting to Dolby Digital. When the setting on the TV is changed, you will experience better sound quality. (The TV menu may
use different words for Dolby Digital and PCM depending on the TV manufacturer.)
Connect to the HDMI IN
(ARC) port of your TV.
HDMI IN
(ARC)
(Multi Function) button at the top of the Soundbar or the
) → Settings ( ) → Sound → Expert Settings → HDMI-eARC Mode (Auto))
TV (eARC/ARC) port of the
HDMI Cable
Top of the Soundbar
ENG - 15
Connect to the HDMI TO
Soundbar main unit.
HDMI TO TV
(eARC/ARC)
Bottom of the Soundbar
TV ARC
(Source) button on the remote