Cleaning And Maintenance; Troubleshooting - BOMANN DTR 353 Bedienungsanleitung, Garantie

Cleaning Cleaning Cleaning

Cleaning and Maintenance

and Maintenance and Maintenance and Maintenance
WARNING: WARNING: WARNING: WARNING:
• Always disconnect the appliance from the power
supply before cleaning and user maintenance.
• Do not use steam cleaners for cleaning the appli-
ance; moisture could enter electrical components.
Risk of electric shock! Hot steam could damage Risk of electric shock!
Risk of electric shock! Risk of electric shock!
the plastic parts.
• The appliance must be dry before restarting oper-
ation.
CAUTION: CAUTION: CAUTION: CAUTION:
• Do not use a wire brush or other sharp, abrasive
items.
• Do not use any acidic or abrasive detergents.
• Do not damage the refrigerant circuit.
Cleaning the appli Cleaning the appliance including interior Cleaning the appli Cleaning the appli ance including interior ance including interior ance including interior
• Clean the appliance interior, the exterior surfaces,
the accessories and the door seal regularly with
warm water and mild detergent.
• Remove the appliance content and storage it at a
cool location.
• Clean the surfaces with a clean sponge, hand
washing liquid and warm water; or with a clean,
damp microfibre cloth without cleaning agent.
• Clean the thaw water discharge channel / opening
carefully e.g. with a pipe cleaner.
• After everything was thoroughly dried, you can
restart the operation.
Defrosting Defrosting Defrosting Defrosting
CAUTION: CAUTION:
CAUTION: CAUTION:
Never use metal objects (e.g. knifes) to remove ice
from the evaporator. Otherwise it can be damaged.
A defect evaporator can cause serious damage.
The fridge fridge has an automatic defrosting system. Dur- fridge fridge
ing defrosting water drops drains off at the back of
the cooling chamber. The thaw water running
All manuals and user guides at all-guides.com
through a channel, is collected in a drip tray located
on the compressor, where it will evaporate. Make
sure the water discharge opening does not get
clogged. A light formation of ice on the interior back
during operation is normal.
To achieve better cooling and to save energy, defrost
the freezer
• To start the defrosting process turn the tempera-
• Remove the food items and keep covered at a
• When the ice has melted, wipe the condensate
• Then you may restart the appliance by connecting
Changing the Changing
Changing Changing
Lamp specifications: 220- - - - 240 V Lamp specifications: 220 Lamp specifications: 220 Lamp specifications: 220
• Remove the lamp cover carefully.
• Change the bulb.
• Reattach the lamp cover properly.
Before you contact an authorized specialist Before you contact an authorized specialist Before you contact an authorized specialist Before you contact an authorized specialist
21
freezer freezer regularly as follows: freezer
ture control to the off state and disconnect the
plug or turn off the fuse.
cool location.
away and dry the appliance interior.
the plug and turning the temperature control.
the bulb bulb
the the bulb bulb

Troubleshooting

Troubleshooting Troubleshooting Troubleshooting
Problem Problem Problem Problem Cause / Action Cause / Action Cause / Action Cause / Action
Unit is not ∙ Check the power supply / tempera-
working ture setting / ambient temperature.
properly or ∙ Unblock the ventilation openings,
at all install the appliance freely.
Loading is ∙ Check the temperature setting /
too warm ambient temperature. ∙ Open the
door only as long as necessary.
Loud noise ∙ Check the appliance position.
during op- ∙ See the section "Operating noise".
eration
240 V ~ / max. 240 V 240 V ~ / max. 10 W 10 W 10 W 10 W
~ / max. ~ / max.