Insert Battery - LaserLiner MultiMeter-Compact Bedienungsanleitung

AUTO OFF function
In order to preserve the batteries, the meter switches off
automatically if it is left idle for 15 minutes.
1

Insert battery

Open the battery compartmenton the housing's rear side
and insert a 9 V battery. Correct polarity must be observed.
2 Attaching the test prods
In order to avoid the risk of injury, the test prods must always
be kept in the holder on the rear of the meter when not in use
and during transport.
3
Connection of test prods
The black test prod (–) must always be connected to the „COM
socket". When taking current measurements, the red test prod (+)
must be connected to the „10 A socket". For all other measuring
functions, the red test prod must be connected to the „VΩHZ socket".
18
EN
1 x 9V NEDA 1604 / IEC 6F22