Settings - CSS MicroSystems AssistX Call Gebrauchsanweisung

42 | Instructions for Use AssistX Call
• Sensor test after plugging in (for sensors with NO)
Flashing
2
time window of 30s is provided for checking the sensor function.
This is indicated by the orange
gering is suppressed if an unsafe sensor is activated. Call suppres-
sion has no effect on safe sensors.

9. Settings

No settings can be made. Only the following functional tests:
Function
Functional test
Simple sensors with NO
Press the button for 1 sec. Release after
fl ashing for test mode.
Test modeSimple sensors with NO
20 sec active. Operate sensor to check
function. The
each sensor with a closing contact has
been actuated once. Checked for 24h.
button LED, goes off when the sensors are actuated; A
LED turns out when
3
LED. During this time, the call trig-
3
LED Button LED Signal