Feedback - CSS MicroSystems AssistX Call Gebrauchsanweisung

40 | Instructions for Use AssistX Call

Feedback:

The caller gets informed by the device when the call release has been
recognized and is forwarded. Two different „Call recognition" situa-
tions are treated. On the one hand, the dispatch of the call by the
, on the other hand, the feedback from the call system
AssistX Call
that the call has been received.
• Call sent
The sending of a call is signalled optically and acoustically. The
signals inform, that
and switched the call line. The signal is shown regardless of the call
system having recognized the call or not.
• Confimation indicator
Call buttons must have a so-called confirmation lamp, which is con-
trolled by the call system to signal the call triggering to the caller.
The confirmation light is red.
light signal from the call system and uses it to switch on the red
LED. This signal is controlled almost directly by the call system and
3
indicates that the call has been received.
has recognized the sensor action
AssistX Call
AssistX Call
receives the confirmation