Problem Identification; Batteries - Stiga BLV 20 Li S Gebrauchsanweisung

• Any use and assembly that is either incorrect or
not permitted by the manufacturer.
• Poor maintenance.
• Modifications to the machine.
• The use of non-original spare parts (adaptable
spare parts).
• Use of attachments not supplied or approved by
the manufacturer.
The warranty does not cover:
• Maintenance operations (described in the
instruction manual).
• Normal wear of consumable materials.
• Normal wear and tear.

12. PROBLEM IDENTIFICATION

PROBLEM
1. The machine does
not start when the
switch is moved
2. The motor shuts
down whilst working
3. The rotor rotates, but
the air does not come
out from the blower tube
4. Excessive noise and/or
vibration is experienced
whilst working
5. The machine gives off
smoke whilst working
6. Battery power
reserve is low
PROBABLE CAUSE
Batteries are missing or
not properly inserted
Low battery(ies)
Defective start/stop switch
or damaged blower
The batteries are not inserted correctly
Low battery(ies)
Blocked or clogged blower tube
Loose or damaged parts
Damaged blower.
Severe working conditions
requiring greater
current absorption
Battery insufficient for
operational requirements
Decrease in battery capacity
• Aesthetic deterioration of the machine due to its
use.
• Additional costs incurred when activating the
warranty, such as transferring the machine to
the user's premises, transporting the machine
to the Dealer, hiring equipment for replacements
or calling upon an external company for all
maintenance work.
The user is protected by his or her own national
legislation. The user's rights provided by his/her
national laws are not restricted in any way by this
warranty.
Make sure that the batteries are
inserted correctly (par. 7.2.3)
Check the batteries status and
recharge if necessary (par. 7.2.2)
Do not use the machine. Immediately
turn off the machine,
and contact a service centre.
Make sure that the batteries are
inserted correctly (par. 7.2.3)
Check the batteries status and
recharge if necessary (par. 7.2.2)
Stop the machine,
and clear any possible obstructions.
Turn off the machine,
–
inspect for damage;
–
check for and tighten any loose parts;
–
have any damaged parts replaced
or repaired with parts having
equivalent specifications.
Do not use the machine. Immediately
turn off the machine,
and contact a service centre.
Optimise operations
(par. 7.2.1)
Use extended batteries (par. 13.1)
Purchase a new battery
EN - 10
REMEDY
remove the battery
remove the batteries
remove the battery and:
remove the battery