Philips CE235BT/13 Bedienungsanleitung Seite 16

Use alternate frequencies
If the signal of an RDS station is poor, enable the
AF (Alternate Frequency) function to search for
another station that broadcasts the same program.
1
Press and hold to access the system menu.
2
Press / repeatedly until [AF ON] or
[AF OFF] is displayed.
3
Rotate to select a setting.
‡ [AF ON]: Enable the AF function.
‡ [AF OFF]: Disable the AF function.
Set the region for AF tuning
You can set the region for AF tuning.
1
Press and hold to access the system menu.
2
Press / repeatedly until [REG ON] or
[REG OFF] is displayed.
3
Rotate to select a setting.
‡ [REG ON]: Only RDS stations in current
region can be tuned to automatically.
‡ [REG OFF]: All RDS stations can be
tuned to automatically.
5HFHLYH WUDIÀF DQQRXQFHPHQW
,I \RX ZDQW WR UHFHLYH WUDIÀF DQQRXQFHPHQW
HQDEOH WKH 7$ 7UDIÀF $QQRXQFHPHQW IXQFWLRQ
1
Press and hold to access the system menu.
2
Press / repeatedly until [TA ON] or
[TA OFF] is displayed.
3
Rotate to select a setting.
‡ [TA ON] :KHQ D WUDIÀF
announcement is on air, the system
automatically switches to the tuner
mode and begins to broadcast the
WUDIÀF DQQRXQFHPHQW :KHQ WKH WUDIÀF
announcement is over, the system
returns to the previous mode.
‡ [TA OFF] 7UDIÀF DQQRXQFHPHQW GRHV
not cut in.
Tip
‡
:KHQ D WUDIÀF DQQRXQFHPHQW FXWV LQ \RX FDQ SUHVV
to switch the system to the previous mode.
14 EN
Synchronize the system clock
You can synchronize the system clock with an
RDS station that transmits time signals.
1
Press and hold to access the system
menu.
2
Press / repeatedly until [CT ON] or
[CT OFF] is displayed.
3
Rotate to select a setting.
‡ [CT ON]: Synchronize the
system clock with the RDS station
automatically.
‡ [CT OFF]: The automatic clock
synchronization with RDS station is
disabled.
Tip
‡
The accuracy of time depends on the RDS station that
transmits time signals.