Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Page EN-20
Troubleshooting table
Troubleshooting table
Malfunctions can occur in all electrical appliances. This does not nec-
essarily mean there is a defect in the appliance. For this reason, please
check the tables to see if you can correct the malfunction.
WARNING
Risk of electric shock in case of improper repair!
Never try to repair a defective or suspected defective appli-
ance yourself. You can put your own and future users' lives in
danger. Only authorised specialists are allowed to carry out
this repair work.
Problem
Possible cause
START-CANCEL
button (5) not pressed.
Mains plug is loose.
The water
does not
become hot.
The socket is defective.
Mains connection cable
is defective.
Appliance
The water temperature
cannot be
is higher than the set
switched on.
temperature.
Appliance
does not
Lid is not closed or the
switch off
buttons are dirty.
automatically.
Solutions, tips
Press the START-CANCEL
button (5) once to start the
heating process.
Check that the mains plug
is firmly inserted into the
socket.
Try the appliance with a
different socket.
Check fuses and/or circuit
breakers.
Check the mains connection
cable for damage. Contact
our Service Centre, where
necessary (see page EN-21).
Select a higher temperature
setting.
Close the lid, clean the
appliance surface.
Werbung
Kapitel
Inhaltsverzeichnis
