Oase Vitronic 11 W Gebrauchsanleitung Seite 23

Dismantling the unit head
CAUTION
The ultra-violet radiation of the UVC lamp can burn your eyes and skin.
Never operate the UVC lamp outside out the casing or in a damaged casing.

 Disconnect the unit from the power grid before starting any maintenance work or before re-
placing the UVC lamp.
CAUTION
The quartz glass and UVC lamp could break and cause cuts.
 Act with caution when performing work on the UVC clarifier in order to avoid cuts.
 Avoid shocks, impacts and abrupt movements to prevent the glass from breaking.

For safety reasons, the UVC lamp can only be turned on when the UVC clarifier is properly
installed in the unit.
Vitronic 11 W
How to proceed:
• Turn the unit head counter-clockwise up to the stop and carefully pull it out of the casing to-
gether with the O ring.
Vitronic 18 W, 24 W, 36 W, 55 W
How to proceed:
• Push down the snap-fit hook, then turn the unit head counter-clockwise up to the stop and
carefully pull the unit head out of the casing.
EN
VTC0003
23