SELFSAT SNIPE DOME 2 Bedienungsanleitung Seite 21

E. PI box and Remote control installation
E-1
Get Power input cable and plug into cigar
lighter socket (12V outlet)
E-3
12V DC
Match the power cables polarities to the
battery polarities, red to red / black to black
ports of the vehicle
E-5
Connect power, PI box and receiver using
cigarette lighter adaptor and PI cable
E-2
To source power from car battery, cut off
cigar-jack connector to take inner three cables
out and peel off each to take copper cable out
E-4
STB
Fix PI Box where it should be fixed using two(2)
of M4x20 screw
E-6
Fix Remote control bracket where it should be
fixed using two(2) of M4x20 screw
ENGLISH - 20
approx.1.5m