Cleaning And Maintenance; Changing Light Bulbs - Teka DVL VR.01 Bedienungsanleitung

Adjustment of the clock
1) Push the on/off' button for 3 seconds.
2) Adjust the hour digits by pressing '+' or '-'.
3) Push the on/off' button again.
4) Adjust the minute digits by pressing '+' or
'-'.
5) After 3 seconds your settings are saved
automatically.
Filter saturation indicator "F"
• When the sign 'Saturation of the filters' is
on, the filters should be cleaned.
• After cleaning the filters, simultaneously
push "+" and "-" for at least 3 seconds
whereupon the sign will be switched off.

Cleaning and maintenance

During cleaning and maintenance work,
make sure the safety instructions are
complied with.
Cleaning the hood body
• If your kitchen hood is made of stainless
steel, use proprietary cleaners mentioned in
the product instructions.
• If your kitchen hood is painted, use lukewarm
water and a neutral soap.
All manuals and user guides at all-guides.com
• Never use metallic scourers, nor abrasive or
• Dry the kitchen hood using a cloth that does
• Do not use vapour cleaners.
• To remove the filters from their fittings, press
• The metal filters can be cleaned by soaking
• Cleaning in a dishwasher may damage the
• Once clean, leave them to dry off and then
For changing the light bulbs please contact the
manufacturer's nearest Technical Service.
corrosive products.
not produce fibres.
Cleaning the metal filters
lightly on the locks and then pull them off.
them in hot water with neutral detergent
until the fat dissolves and then rinsing them
under the tap or using special anti-grease
products. They can also be washed in a
dishwasher. In this case, it is advisable to
stack them vertically to avoid food residues
to stick to them.
metallic surface (blackening it), although this
will not affect its fat retention capacity.
fit them onto the kitchen hood.

Changing light bulbs