Wireless - Megasat SAT to IP Server 2 Bedienungsanleitung

4. System Settings

4.1.2 Wireless

Wireless option can be configure
by Auto (or) Manual.
If user selects „Auto", WiFi routers
which is available nearby can be
discovered automatically & listed.
# Network name (SSID): Name of
the network. Network name will
be truncated with ellipsis (...) if
the network name exceeds more
than 15 characters.
# Signal Quality: Signal icon dis-
played with different colors based
on the reception quality.
# Lock: Lock icon will be displayed
if the connection mode is secu-
re. Supported security modes are
WPA, WPA2, WEP-64 bit, WEP-128
bit.
12
ENGLISH
4. System Settings
Password request screen will be
displayed if user select WPA se-
cure system available WiFi router.
Using keypad user should enter
the valid WPA key.
A warning pop-up is displayed
if the password is invalid or the
Receiver is unable to connect to
the network.
In the event that the warning
pop-up is displayed, pressing any
key causes the network list to be
re-displayed with the same net-
work in focus.
Enter valid password and select
„Connect" button; the wireless
network will be connected suc-
cessfully.
ENGLISH
13