Configuration - Megasat SAT to IP Server 2 Bedienungsanleitung

2. Connection & How to access
Identify the IP address
Turn on the server. The server connects to the network and receives
own IP address automatically. You can also assign the server in your network a static IP
address with DHCP.
To access the web configurator, it is necessary the IP address
to identify the device. This can be found in the following manner:
The Megasat SAT> IP Server 2 supports UPnP technology that experienced it
Users allows the IP address to identify a free UPnP tool (eg Intel Developer Tools for UPnP
Technologies).
• Download the appropriate software on the PC and install it.
• Open the „Device Spy" from the Start menu.
06
DEUTSCH
2. Connection & How to access
• Select in the list of „UPnP Devices" to „Megasat SAT> IP Server 2", and read the corre-
sponding „Base URL" from (for example 192.168.2.100)

Configuration

The server can be configured with a PC that is located in the same network. The configu-
ration is done through a web browser with which you have to log in to access the user
interface of the server.
Open a web browser (Recommended: Google Chrome or Opera) and enter the server's
IP address. You can find the assigned IP address in the configuration menu of the Internet
router.
192.168.3.128
DEUTSCH
07