Network Settings; Wired - Megasat SAT to IP Server 2 Bedienungsanleitung

4. System Settings
Click „System Setting" from the Server page.
Topics covered under Admin are listed below:

• Network Settings

• LNB Settings
• Import Settings
• Export Settings
4.1 Network Settings
Wired Network
Server box supports the below IP mode of configurations in Wired network,
• DHCP (Managed Network)
• AUTO IP (Unmanaged network)
• Manual (User IP configuration)
Note:
1. By default the Server box is in DHCP mode.
2. Server box failed to find DHCP server then it will automatically move to Auto-IP
mode & allocate IP address in 169.x.x.x range.
Wireless Network
Server box supports the below IP mode of configurations in Wireless network.
• Auto
• Manual
10
ENGLISH
4. System Settings

4.1.1 Wired

By default the Server box is in
DHCP mode.
Server acquires IP address from
DHCP server & listed the informa-
tion on the screen.
Server box failed to find DHCP ser-
ver then it will automatically move
to Auto-IP mode & allocate IP ad-
dress in 169.x.x.x range.
User can configure the IP settings
by „Manual" mode also. In manual
mode user can enter/edit the IP
settings. IP configuration can be
edited from this dialog.
After complete the IP configurati-
on, click „Apply" for save.
ENGLISH
11